Fixing HDB Peeling Paint or Flaking Paint Wall

  • by

Step by step instructions to Fix Peeling Paint

Before you continue, be sure to check out our other article on fixing wall cracks and holes here.

Peeling paint should be taken out first before you can cover up the surface. Adhere to these guidelines to fix flaking paint.

What You Need

  • Plastic drop fabric or canvas
  • Painters tape
  • Wire brush or paint scrubber
  • Fixing compound
  • Clay blade
  • Fine-coarseness sandpaper
  • Tack fabric or wipe
  • Paint roller or brush
  • Primer
  • Paint

Stage 1: Prep Your Workspace

Regardless of whether the peeling paint is toxic, you should in any case wear a security cover, glasses, and gloves to ensure yourself. Despite the size of the region or the kind of paint utilized, place an enormous bit of plastic or a canvas close to the territory so as to get any wanderer bits of paint. Tape off close by trim territories, for example, baseboards, and eliminate any furnishings, floor coverings, or different finishings from the space. Spot drop fabrics around the space to keep paint on the ideal surfaces.

Stage 2: Remove Problem Areas

On the off chance that your paint is peeling, you’ll have to eliminate the paint in the influenced region. Utilize a wire brush or paint scrubber ($10, The Home Depot) to scratch off all free paint. Try not to utilize an excessive amount of weight while scratching or you may harm the surface underneath.

Stage 3: Make Any Necessary Repairs

When the peeling paint is eliminated, you may be left with cracks or holes in the wall. Any harm ought to be fixed before you repaint. Apply a fixing compound ($6, The Home Depot) with a clay blade varying; smooth and let dry as indicated by the producer’s bearings.

Stage 4: Establish a Smooth Surface

Regardless of whether you’ve needed to fix the peeling paint region, you’ll need to sand the space so as to guarantee a wall surface liberated from any furrows or lines. Utilize fine-coarseness sandpaper to smooth the zone down. Run your hand over the surface to guarantee it’s totally even with the encompassing wall.

Stage 5: Clean the Area

The region ought to be totally perfect to permit the new paint to follow appropriately. Utilizing either a tack fabric or a softly moist (not wet) wipe, clear off the territory to be painted. Wipe the surface again with a spotless, dry cloth and let dry completely.

Stage 6: Prime Walls

In the event that dampness was the reason for peeling paint, it’s especially essential to shield your recently painted territory from a similar issue. Primer can help seal the surface to secure against dampness and permit the paint to appropriately stick. Spread the region with primer, permitting the surface to dry as indicated by the producer’s bearings.

Check out our other article on whether you need to use a sealer for your hdb wall here.

Stage 7: Paint Walls

Your wall is currently fit to be painted. Apply the principal coat uniformly over the prepared area. Dry as per the producer’s headings; apply a subsequent coat if important and let dry. Eliminate the tape and drop fabric and make the most of your new streamlined surface!

If you are painting your exterior wall, check out our article on choosing the best exterior wall paint for landed house here.